Home
History Products News Production Photo Gallery Contact Links
               

Maple water is transformed into maple syrup in a sugarhouse, or "sugar shack." The finest syrup can only be made from fresh, clean sap. The collected sap is boiled down into syrup.

   
     

Maple Syrup
History

Maple Facts

Tapping Maple
Trees

Boiling the Sap

Nutritional Value

     
       

The art of sugaring is centered on the evaporator which, fired by wood, oil or gas, heats the sap until it boils, sending billows of steam up through the vent or cupola at the top of the sugarhouse. From the time the maple water is poured into the evaporator to the time it turns into syrup, it undergoes a complex chain of chemical reactions which produce the characteristically "maple" colour and flavour.

               
             
     
             

The sap will deteriorate if not attended to quickly. The sap must be boiled the same day it is gathered, so a hot and steady fire is kept going at all times.

The "boiling down" process is slow - sometimes continuing far into the night. Evaporation that is too slow or too fast will affect the color, flavor and texture of the syrup. At sea level, the correct temperature for evaporation is 104ºC. However, since the boiling point varies with altitude, a thermometer must be used to adjust the cooking temperature. For example, in a region where the boiling point of water is 98ºC (or 2ºC below normal), the cooking temperature of the sap must also be reduced by 2ºC (to 102ºC). There is, on average a 40:1 ratio when it comes to acquiring Maple Syrup. Around 40 litres (or gallons) of maple water must be evaporated to produce 1 litre (or gallon) of syrup. Most of the water (66%) in it evaporates during this process, leaving concentrated maple syrup.

 
             

Increasingly, producers are using machines that partially concentrate the sap by reverse osmosis, an advanced technique which offers energy savings of 60%, while conserving original maple product characteristics.

 
   
Maple syrup must be filtered to remove the impurities that could affect its appearance and flavor. It is important to adjust the density to between 66º and 67º Brix (the Brix unit of measurement indicates the risk of fermentation or crystallization). The syrup is then bottled or put in galvanized metal cans while still very hot (87ºC or more). The heat sterilizes the containers and prevents the formation of mold.
         

Call 613-256-1826 or email Thompsontown Maple Products for information.

2007 Thompsontown Maple Products